Product List (Total 13 Products)

1. CaCo3 Calcium Carbonate LLDPE/HDPE Masterbatch CA55 and CA60

High quality 82% Concentrated Calcium Carbonate Masterbatch on HDPE CA55) and LLDPE (CA60 and PE82) carrier. Particle size ave. 5 micron. Maximum particle size 25 micron. ...
Last Updated: 2009-07-01

2. Calcium Carbonate PP Masterbatch (CA27 and PP82)

High Quality 82% concentrated Calcium Carbonate Masterbatch on PP carrier. We call it granulated chalk. We supply two qualities: CA27 - our low cost standard with a particle ...
Last Updated: 2009-03-05

3. Slip and Antiblock Masterbatch For PE Film (MAB 1052)

Tanamera MAB 1052 solves PE film blocking problems. It is an effective, low cost, slip and antiblock masterbatch for all PE film production. The product is highly ...
Last Updated: 2009-03-05

4. PPGF6XNAT1001 - 30% Coupled Glass Fiber PP Natural

TANAMERA PPGF6XNAT1001 is a natural coloured, 30% Chemically Coupled Glass Fiber reinforced Polypropylene homopolymer This TANAMERA Compound is 100% based upon new raw ...
Last Updated: 2009-03-05

5. TALC Masterbatch TA25 and TA36

High quality 78% concentrated Talc masterbatches on PP and HDPE carrier TA36 - 78% Talc on PP carrier. For use as a filler in PP resins. It will reduce the cost and increase ...
Last Updated: 2009-03-05

6. Cross-Linkable Nylon 66 Compound

TANAMERA PA66GF6VNAT1000 is a 30% glass reinforced Nylon 66 that can be cross-linked after the parts have been injection moulded. Using e-beam irradiation on the finished will ...
Last Updated: 2009-03-05

7. TPE Adhesion PC, ABS

TPE with adhesion modification are use in overmoulding hard plastics such as PC, PC/ABS blends and ABS to create a soft touch effect. Hardness of these grades is 50, 65 and 75 ...
Last Updated: 2009-03-05

8. Hydrocarbon Resin Masterbatch for BOPP Film (MHC 3372)

TANAMERA MHC 3372 sigificant increases the stiffness of BOPP cigarette film. The hydrocarbon resin used in MHC 3372 is a H-DCPD resin and the carrier is a PP homopolymer, ...
Last Updated: 2009-03-05

9. MGL 2033 - TPE Mould Release Masterbatch (FDA Quality)

Tanamera MGL 2033 solves mould release problems in TPE / TPV injection moulding. The addition of 1% of TANAMERA MGL 2033 Masterbatch to your TPE or TPV is in most cases ...
Last Updated: 2009-03-05

10. Thermal Conductive PP and TPE

TANAMERA CPD TC series of products are thermal conductive thermoplastic injection moulding and extrusion compounds. The TPE version has a thermal conductivity or around 1. 1 W/mK ...
Last Updated: 2009-03-05

Home » Member Showroom

Product List (Total 13 Products)